Lawaranceville E-Newsletter

Point out news stories, on the net or in mainstream media, related to polywell fusion.

Moderators: tonybarry, MSimon

Ivy Matt
Posts: 689
Joined: Sat May 01, 2010 6:43 am

Re: Lawaranceville E-Newsletter

Post by Ivy Matt »

Great news! I've been waiting for this moment for years.

Beryllium electrodes - check
Hydrogen-boron fill gas - closer than ever before
Net energy gain - ?
Temperature, density, confinement time: pick any two.

Maui
Posts: 577
Joined: Wed Apr 09, 2008 12:10 am
Location: Madison, WI

Re: Lawaranceville E-Newsletter

Post by Maui »

We’re now over 30 shots and we have tripled fusion yield over last week. Not time yet to break out champagne, as we are still a factor of 4 short of our own record yield of ¼ joule. But going in the right direction. We’ve scanned from low to high fill pressure and we have found the sweet spot for now. Improvements are still needed. For one thing, FF2B was making too much noise when it fired— from shorts or arcs somewhere outside the vacuum chamber. We tracked them down and fixed them. Also, the appearance of the anode continues to evolve from shot to shot. After one shot, a horizontal line appeared on part of the anode, but then disappeared a couple of shots later. For symmetry the anode has to settle down to the same appearance—and thus the same smoothness—everywhere. This will take some time. The image is the raw data from our Far Time of Flight detector(FTF)which shows the arrival of the x-ray peak(small peak at left) and the slower neutrons(big peak at right). Vertical scale is volts and horizontal is time in ns (billionths of a second).From shot 6, June 18. The height of the big peak at right is one way we know we have more fusion yield, as we are now working with deuterium, which produces neutrons from fusion reactions. Another way we measure fusion yield is our silver activation counter and a third way is from our bubble detectors( featured in future posts--stay tuned.)

bennmann
Posts: 230
Joined: Sun May 17, 2009 5:56 pm
Location: Southeast US

Re: Lawaranceville E-Newsletter

Post by bennmann »

https://lppfusion.com/plasma-simulation-advances/

Still my favorite underdog producing plasma - until J Park publishes anything again

Giorgio
Posts: 2771
Joined: Wed Oct 07, 2009 6:15 pm
Location: China, Italy

Re: Lawaranceville E-Newsletter

Post by Giorgio »

Unfortunately it seems that their advancement speed has reduced drastically in the last couple of years.
Not sure if it depends from lack of found or if they hit a stagnant point in their technological development.
A society of dogmas is a dead society.

toddzilla
Posts: 15
Joined: Wed Apr 06, 2011 7:46 pm
Location: North Carolina

Re: Lawaranceville E-Newsletter

Post by toddzilla »

Bennmann, did you notice it was one year to the hour since the previous update in this thread? :D Giorgio, their advancement has slowed, but they're trying harder things and keep having speed bumps. I respect the open manner they discuss advancement as well as challenges.

Post Reply