thread for segments files and parameters for simulation runs

Discuss how polywell fusion works; share theoretical questions and answers.

Moderators: tonybarry, MSimon

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

tibbets 4-coil position space run is uploading now. 'bout half an hour left.

as i expected and for exactly the same reason its confinement is horrible. you'll see when its done uploading.

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

tibbets 4-coil position space:

http://www.youtube.com/watch?v=JY9Lb6Bx6T0

i ran it at 1E5.292 amp turns, 1E-9.035 net charge. this is the standard amp turns i use for 15cm radius, but lower plamsa density. it corresponds to about 7 tesla on a standard wb-6 config. later in the sim i try turning the mag field strength up a bit and the plasma density down about an order of magnitude to get better confinement. doesn't make a whole lot of difference.

EDIT: eee.. i forgot that compression really lowers the resolution so i have to up the point size. uploading a new one now, which should be clearer. also shows it from more different angles.

rjaypeters
Posts: 869
Joined: Fri Aug 20, 2010 2:04 pm
Location: Summerville SC, USA

Post by rjaypeters »

happyjack27.
Thanks again. It's a shame confinement isn't better for that configuration. Perhaps D. Tibbets has some recommendations?

Edit: It looks bad for all of the paired-coil configurations.
"Aqaba! By Land!" T. E. Lawrence

R. Peters

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

okay, here's a new video. hopefully this one's a little clearer.

make sure to turn it up to 720p full screen to get the best resolution.

http://www.youtube.com/watch?v=J9OGdrjXnj8

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

the simple way i look at it is the electron core is going to look pretty much like the geometric inverse of the magrid. i.e positive space = negative space.

and the geometric inverse of tibbet's 4-coil is basically two intersecting pipes. and big ones, at that.

haven't applied this line of thinking to the cusp disruptor models, though. not sure it's that simple in these cases, 'cause now you got a grid outside a grid, with fields that are orthogonal to each other.

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

coil disruptors only, first orientation:

http://www.youtube.com/watch?v=QoJaiJ7-vzU

2nd orientation (flipping a coil pair) is uploading, will post it in this comment when its done. looks the same though.

it seems it bifurcates (or trifurcates, i guess) so that it can go into the line and disc confiuguration we seem to see so often. (shall i call it a "spindle"? not sure it actually "spins"...)

notice the axis of the spindle aligns such that if you compare it to the images on the first post on this page, it's going from top to bottom right through the center. thus from this orientation the coils look perfectly symmetric.

i suppose any way you orient the magnets, you can find a plane such that the fields are opposite and equal on each side of the plane. and that is the plane on which the disc lies. so much for spherical symmetry on that one.

EDIT: mode 2. which apparently is equivalent to mode 1. http://www.youtube.com/watch?v=HN71uCfxieU

rjaypeters
Posts: 869
Joined: Fri Aug 20, 2010 2:04 pm
Location: Summerville SC, USA

Post by rjaypeters »

Return to Coruscant (Part One): Image

Code: Select all

//Truncated Icosahedron, 1m central radius
//Large - 20 coils x 24 segments, small - 12 coils x 16 segments
//Large ring circumferences, ideal - 1.891m, segmented = 1.872
//large -0.301, -0.522, 0.673 coil begins - #1
24
-0.271,	-0.765,	0.498,	-0.199,	-0.766,	0.529
-0.199,	-0.766,	0.529,	-0.134,	-0.751,	0.570
-0.134,	-0.751,	0.570,	-0.080,	-0.719,	0.618
-0.080,	-0.719,	0.618,	-0.042,	-0.675,	0.670
-0.042,	-0.675,	0.670,	-0.021,	-0.620,	0.722
-0.021,	-0.620,	0.722,	-0.019,	-0.558,	0.771
-0.019,	-0.558,	0.771,	-0.036,	-0.494,	0.813
-0.036,	-0.494,	0.813,	-0.071,	-0.432,	0.846
-0.071,	-0.432,	0.846,	-0.122,	-0.376,	0.866
-0.122,	-0.376,	0.866,	-0.186,	-0.330,	0.874
-0.186,	-0.330,	0.874,	-0.257,	-0.297,	0.868
-0.257,	-0.297,	0.868,	-0.331,	-0.279,	0.848
-0.331,	-0.279,	0.848,       -0.403,	-0.278,	0.817
-0.403,	-0.278,	0.817,	-0.468,	-0.293,	0.776
-0.468,	-0.293,	0.776,	-0.522,	-0.325,	0.728
-0.522,	-0.325,	0.728,	-0.560,	-0.369,	0.676
-0.560,	-0.369,	0.676,	-0.581,	-0.424,	0.624
-0.581,	-0.424,	0.624,	-0.583,	-0.486,	0.575
-0.583,	-0.486,	0.575,	-0.566,	-0.550,	0.533
-0.566,	-0.550,	0.533,	-0.531,	-0.612,	0.500
-0.531,	-0.612,	0.500,	-0.480,	-0.668,	0.480
-0.480,	-0.668,	0.480,	-0.416,	-0.714,	0.472
-0.416,	-0.714,	0.472,	-0.345,	-0.747,	0.478
-0.345,	-0.747,	0.478,	-0.271,	-0.765,	0.498
//large -0.301, -0.522, 0.673 coil ends - #1
//large 0.301, 0.522, -0.674 coil begins - #2
24
0.331,	0.752,	-0.482,	0.403,	0.722,	-0.474
0.403,	0.722,	-0.474,	0.468,	0.678,	-0.478
0.468,	0.678,	-0.478,	0.522,	0.624,	-0.496
0.522,	0.624,	-0.496,	0.560,	0.563,	-0.527
0.560,	0.563,	-0.527,	0.581,	0.499,	-0.567
0.581,	0.499,	-0.567,	0.583,	0.436,	-0.614
0.583,	0.436,	-0.614,	0.566,	0.379,	-0.666
0.566,	0.379,	-0.666,	0.531,	0.332,	-0.718
0.531,	0.332,	-0.718,	0.480,	0.298,	-0.767
0.480,	0.298,	-0.767,	0.416,	0.280,	-0.810
0.416,	0.280,	-0.810,	0.345,	0.277,	-0.844
0.345,	0.277,	-0.844,	0.271,	0.292,	-0.866
0.271,	0.292,	-0.866,	0.199,	0.322,	-0.874
0.199,	0.322,	-0.874,	0.134,	0.366,	-0.870
0.134,	0.366,	-0.870,	0.080,	0.420,	-0.852
0.080,	0.420,	-0.852,	0.042,	0.481,	-0.821
0.042,	0.481,	-0.821,	0.021,	0.545,	-0.781
0.021,	0.545,	-0.781,	0.019,	0.608,	-0.734
0.019,	0.608,	-0.734,	0.036,	0.665,	-0.682
0.036,	0.665,	-0.682,	0.071,	0.712,	-0.630
0.071,	0.712,	-0.630,	0.122,	0.746,	-0.581
0.122,	0.746,	-0.581,	0.186,	0.764,	-0.538
0.186,	0.764,	-0.538,	0.257,	0.767,	-0.504
0.257,	0.767,	-0.504,	0.331,	0.752,	-0.482
//large 0.301, 0.522, -0.674 coil ends - #2
//large +z coil begins - #3
24
0.000,	0.301,	0.904,	-0.078,	0.291,	0.904
-0.078,	0.291,	0.904,	-0.151,	0.261,	0.904
-0.151,	0.261,	0.904,	-0.213,	0.213,	0.904
-0.213,	0.213,	0.904,	-0.261,	0.151,	0.904
-0.261,	0.151,	0.904,	-0.291,	0.078,	0.904
-0.291,	0.078,	0.904,	-0.301,	0.000,	0.904
-0.301,	0.000,	0.904,	-0.291,	-0.078,	0.904
-0.291,	-0.078,	0.904,	-0.261,	-0.151,	0.904
-0.261,	-0.151,	0.904,	-0.213,	-0.213,	0.904
-0.213,	-0.213,	0.904,	-0.151,	-0.261,	0.904
-0.151,	-0.261,	0.904,	-0.078,	-0.291,	0.904
-0.078,	-0.291,	0.904,	0.000,	-0.301,	0.904
0.000,	-0.301,	0.904,	0.078,	-0.291,	0.904
0.078,	-0.291,	0.904,	0.151,	-0.261,	0.904
0.151,	-0.261,	0.904,	0.213,	-0.213,	0.904
0.213,	-0.213,	0.904,	0.261,	-0.151,	0.904
0.261,	-0.151,	0.904,	0.291,	-0.078,	0.904
0.291,	-0.078,	0.904,	0.301,	0.000,	0.904
0.301,	0.000,	0.904,	0.291,	0.078,	0.904
0.291,	0.078,	0.904,	0.261,	0.151,	0.904
0.261,	0.151,	0.904,	0.213,	0.213,	0.904
0.213,	0.213,	0.904,	0.151,	0.261,	0.904
0.151,	0.261,	0.904,	0.078,	0.291,	0.904
0.078,       0.291,	0.904	0.000,	0.301,	0.904
//large +z coil ends - #3
//large -z coil begins - #4
24
0.000,	-0.301,	-0.904,	-0.078,	-0.291,	-0.904
-0.078,	-0.291,	-0.904,	-0.151,	-0.261,	-0.904
-0.151,	-0.261,	-0.904,	-0.213,	-0.213,	-0.904
-0.213,	-0.213,	-0.904,	-0.261,	-0.151,	-0.904
-0.261,	-0.151,	-0.904,	-0.291,	-0.078,	-0.904
-0.291,	-0.078,	-0.904,	-0.301,	0.000,	-0.904
-0.301,	0.000,	-0.904,	-0.291,	0.078,	-0.904
-0.291,	0.078,	-0.904,	-0.261,	0.151,	-0.904
-0.261,	0.151,	-0.904,	-0.213,	0.213,	-0.904
-0.213,	0.213,	-0.904,	-0.151,	0.261,	-0.904
-0.151,	0.261,	-0.904,	-0.078,	0.291,	-0.904
-0.078,	0.291,	-0.904,	0.000,	0.301,	-0.904
0.000,	0.301,	-0.904,	0.078,	0.291,	-0.904
0.078,	0.291,	-0.904,	0.151,	0.261,	-0.904
0.151,	0.261,	-0.904,	0.213,	0.213,	-0.904
0.213,	0.213,	-0.904,	0.261,	0.151,	-0.904
0.261,	0.151,	-0.904,	0.291,	0.078,	-0.904
0.291,	0.078,	-0.904,	0.301,	0.000,	-0.904
0.301,	0.000,	-0.904,	0.291,	-0.078,	-0.904
0.291,	-0.078,	-0.904,	0.261,	-0.151,	-0.904
0.261,	-0.151,	-0.904,	0.213,	-0.213,	-0.904
0.213,	-0.213,	-0.904,	0.151,	-0.261,	-0.904
0.151,	-0.261,	-0.904,	0.078,	-0.291,	-0.904
0.078,	-0.291,	-0.904,	0.000,	-0.301,	-0.904
//large -z coil begins - #4
//large -0.301, 0.522, 0.674 coil begins - #5
24
-0.301,	0.760,	0.490,	-0.374,	0.736,	0.475
-0.374,	0.736,	0.475,	-0.443,	0.697,	0.475
-0.443,	0.697,	0.475,	-0.502,	0.647,	0.488
-0.502,	0.647,	0.488,	-0.547,	0.588,	0.513
-0.547,	0.588,	0.513,	-0.575,	0.524,	0.550
-0.575,	0.524,	0.550,	-0.585,	0.461,	0.595
-0.585,	0.461,	0.595,	-0.575,	0.401,	0.645
-0.575,	0.401,	0.645,	-0.547,	0.350,	0.698
-0.547,	0.350,	0.698,	-0.502,	0.310,	0.748
-0.502,	0.310,	0.748,	-0.443,	0.285,	0.794
-0.443,	0.285,	0.794,	-0.374,	0.276,	0.832
-0.374,	0.276,	0.832,	-0.301,	0.284,	0.858
-0.301,	0.284,	0.858,	-0.228,	0.308,	0.873
-0.228,	0.308,	0.873,	-0.159,	0.347,	0.873
-0.159,	0.347,	0.873,	-0.100,	0.397,	0.860
-0.100,	0.397,	0.860,	-0.055,	0.456,	0.835
-0.055,	0.456,	0.835,	-0.027,	0.520,	0.798
-0.027,	0.520,	0.798,	-0.017,	0.583,	0.753
-0.017,	0.583,	0.753,	-0.027,	0.643,	0.703
-0.027,	0.643,	0.703,	-0.055,	0.694,	0.650
-0.055,	0.694,	0.650,	-0.100,	0.734,	0.600
-0.100,	0.734,	0.600,	-0.159,	0.759,	0.554
-0.159,	0.759,	0.554,	-0.228,	0.768,	0.516
-0.228,	0.768,	0.516,	-0.301,	0.760,	0.490
//large -0.301, 0.522, 0.674 coil ends - #5
//large 0.301,- 0.522, -0.674 coil begins - #6
24
0.301,	-0.760,	-0.490,	0.228,	-0.768,	-0.516
0.228,	-0.768,	-0.516,	0.159,	-0.759,	-0.554
0.159,	-0.759,	-0.554,	0.100,	-0.734,	-0.600
0.100,	-0.734,	-0.600,	0.055,	-0.694,	-0.650
0.055,	-0.694,	-0.650,	0.027,	-0.643,	-0.703
0.027,	-0.643,	-0.703,	0.017,	-0.583,	-0.753
0.017,	-0.583,	-0.753,	0.027,	-0.520,	-0.798
0.027,	-0.520,	-0.798,	0.055,	-0.456,	-0.835
0.055,	-0.456,	-0.835,	0.100,	-0.397,	-0.860
0.100,	-0.397,	-0.860,	0.159,	-0.347,	-0.873
0.159,	-0.347,	-0.873,	0.228,	-0.308,	-0.873
0.228,	-0.308,	-0.873,	0.301,	-0.284,	-0.858
0.301,	-0.284,	-0.858,	0.374,	-0.276,	-0.832
0.374,	-0.276,	-0.832,	0.443,	-0.285,	-0.794
0.443,	-0.285,	-0.794,	0.502,	-0.310,	-0.748
0.502,	-0.310,	-0.748,	0.547,	-0.350,	-0.698
0.547,	-0.350,	-0.698,	0.575,	-0.401,	-0.645
0.575,	-0.401,	-0.645,	0.585,	-0.461,	-0.595
0.585,	-0.461,	-0.595,	0.575,	-0.524,	-0.550
0.575,	-0.524,	-0.550,	0.547,	-0.588,	-0.513
0.547,	-0.588,	-0.513,	0.502,	-0.647,	-0.488
0.502,	-0.647,	-0.488,	0.443,	-0.697,	-0.475
0.443,	-0.697,	-0.475,	0.374,	-0.736,	-0.475
0.374,	-0.736,	-0.475,	0.301,    -0.760,	-0.490
//large 0.301,- 0.522, -0.674 coil ends - #6
//large +x, +z coil begins - #7
24
0.379,	0.000,	0.875,	0.386,	-0.078,	0.868
0.386,	-0.078,	0.868,	0.409,	-0.151,	0.848
0.409,	-0.151,	0.848,	0.444,	-0.213,	0.816
0.444,	-0.213,	0.816,	0.491,	-0.261,	0.774
0.491,	-0.261,	0.774,	0.545,	-0.291,	0.726
0.545,	-0.291,	0.726,	0.603,	-0.301,	0.674
0.603,	-0.301,	0.674,	0.661,	-0.291,	0.622
0.661,	-0.291,	0.622,	0.715,	-0.261,	0.574
0.715,	-0.261,	0.574,	0.762,	-0.213,	0.532
0.762,	-0.213,	0.532,	0.797,	-0.151,	0.500
0.797,	-0.151,	0.500,	0.820,	-0.078,	0.480
0.820,	-0.078,	0.480,	0.827,	0.000,	0.473
0.827,	0.000,	0.473,	0.820,	0.078,	0.480
0.820,	0.078,	0.480,	0.797,	0.151,	0.500
0.797,	0.151,	0.500,	0.762,	0.213,	0.532
0.762,	0.213,	0.532,	0.715,	0.261,	0.574
0.715,	0.261,	0.574,	0.661,	0.291,	0.622
0.661,	0.291,	0.622,	0.603,	0.301,	0.674
0.603,	0.301,	0.674,	0.545,	0.291,	0.726
0.545,	0.291,	0.726,	0.491,	0.261,	0.774
0.491,	0.261,	0.774,	0.444,	0.213,	0.816
0.444,	0.213,	0.816,	0.409,	0.151,	0.848
0.409,	0.151,	0.848,	0.386,	0.078,	0.868
0.386,	0.078,	0.868,	0.379,	0.000,	0.875
//large +x, +z coil ends - #7
//large -x, -z coil begins - #8
24
-0.827,	0.000,	-0.473,	-0.820,	0.078,	-0.480
-0.820,	0.078,	-0.480,	-0.797,	0.151,	-0.500
-0.797,	0.151,	-0.500,	-0.762,	0.213,	-0.532
-0.762,	0.213,	-0.532,	-0.715,	0.261,	-0.574
-0.715,	0.261,	-0.574,	-0.661,	0.291,	-0.622
-0.661,	0.291,	-0.622,	-0.603,	0.301,	-0.674
-0.603,	0.301,	-0.674,	-0.545,	0.291,	-0.726
-0.545,	0.291,	-0.726,	-0.491,	0.261,	-0.774
-0.491,	0.261,	-0.774,	-0.444,	0.213,	-0.816
-0.444,	0.213,	-0.816,	-0.409,	0.151,	-0.848
-0.409,	0.151,	-0.848,	-0.386,	0.078,	-0.868
-0.386,	0.078,	-0.868,	-0.379,	0.000,	-0.875
-0.379,	0.000,	-0.875,	-0.386,	-0.078,	-0.868
-0.386,	-0.078,	-0.868,	-0.409,	-0.151,	-0.848
-0.409,	-0.151,	-0.848,	-0.444,	-0.213,	-0.816
-0.444,	-0.213,	-0.816,	-0.491,	-0.261,	-0.774
-0.491,	-0.261,	-0.774,	-0.545,	-0.291,	-0.726
-0.545,	-0.291,	-0.726,	-0.603,	-0.301,	-0.674
-0.603,	-0.301,	-0.674,	-0.661,	-0.291,	-0.622
-0.661,	-0.291,	-0.622,	-0.715,	-0.261,	-0.574
-0.715,	-0.261,	-0.574,	-0.762,	-0.213,	-0.532
-0.762,	-0.213,	-0.532,	-0.797,	-0.151,	-0.500
-0.797,	-0.151,	-0.500,	-0.820,	-0.078,	-0.480
-0.820,	-0.078,	-0.480,	-0.827,	0.000,	-0.473
//large -x, -z coil ends - #8
//large 0.789, -0.322, -0.301 coil begins - #9
24
0.789,	-0.528,	-0.081,	0.751,	-0.570,	-0.135
0.751,	-0.570,	-0.135,	0.716,	-0.596,	-0.200
0.716,	-0.596,	-0.200,	0.685,	-0.603,	-0.272
0.685,	-0.603,	-0.272,	0.662,	-0.591,	-0.346
0.662,	-0.591,	-0.346,	0.647,	-0.561,	-0.417
0.647,	-0.561,	-0.417,	0.642,	-0.514,	-0.480
0.642,	-0.514,	-0.480,	0.647,	-0.454,	-0.531
0.647,	-0.454,	-0.531,	0.662,	-0.385,	-0.566
0.662,	-0.385,	-0.566,	0.685,	-0.312,	-0.583
0.685,	-0.312,	-0.583,	0.716,	-0.240,	-0.581
0.716,	-0.240,	-0.581,	0.751,	-0.173,	-0.560
0.751,	-0.173,	-0.560,	0.789,	-0.116,	-0.521
0.789,	-0.116,	-0.521,	0.827,	-0.074,	-0.467
0.827,	-0.074,	-0.467,	0.862,	-0.048,	-0.402
0.862,	-0.048,	-0.402,	0.893,	-0.041,	-0.330
0.893,	-0.041,	-0.330,	0.916,	-0.053,	-0.256
0.916,	-0.053,	-0.256,	0.931,	-0.083,	-0.185
0.931,	-0.083,	-0.185,	0.936,	-0.130,	-0.122
0.936,	-0.130,	-0.122,	0.931,	-0.190,	-0.071
0.931,	-0.190,	-0.071,	0.916,	-0.259,	-0.036
0.916,	-0.259,	-0.036,	0.893,	-0.332,	-0.019
0.893,	-0.332,	-0.019,	0.862,	-0.404,	-0.021
0.862,	-0.404,	-0.021,	0.827,	-0.471,	-0.042
0.827,	-0.471,	-0.042,	0.789,	-0.528,	-0.081
//large 0.789, -0.322, -0.301 coil ends - #9
//large -0.789, 0.322, 0.301 coil begins - #10
24
-0.789,	0.528,	0.081,	-0.827,	0.471,	0.042
-0.827,	0.471,	0.042,	-0.862,	0.404,	0.021
-0.862,	0.404,	0.021,	-0.893,	0.332,	0.019
-0.893,	0.332,	0.019,	-0.916,	0.259,	0.036
-0.916,	0.259,	0.036,	-0.931,	0.190,	0.071
-0.931,	0.190,	0.071,	-0.936,	0.130,	0.122
-0.936,	0.130,	0.122,	-0.931,	0.083,	0.185
-0.931,	0.083,	0.185,	-0.916,	0.053,	0.256
-0.916,	0.053,	0.256,	-0.893,	0.041,	0.330
-0.893,	0.041,	0.330,	-0.862,	0.048,	0.402
-0.862,	0.048,	0.402,	-0.827,	0.074,	0.467
-0.827,	0.074,	0.467,	-0.789,	0.116,	0.521
-0.789,	0.116,	0.521,	-0.751,	0.173,	0.560
-0.751,	0.173,	0.560,	-0.716,	0.240,	0.581
-0.716,	0.240,	0.581,	-0.685,	0.312,	0.583
-0.685,	0.312,	0.583,	-0.662,	0.385,	0.566
-0.662,	0.385,	0.566,	-0.647,	0.454,	0.531
-0.647,	0.454,	0.531,	-0.642,	0.514,	0.480
-0.642,	0.514,	0.480,	-0.647,	0.561,	0.417
-0.647,	0.561,	0.417,	-0.662,	0.591,	0.346
-0.662,	0.591,	0.346,	-0.685,	0.603,	0.272
-0.685,	0.603,	0.272,	-0.716,	0.596,	0.200
-0.716,	0.596,	0.200,	-0.751,	0.570,	0.135
-0.751,	0.570,	0.135,	-0.789,	0.528,	0.081
//large -0.789, 0.322, 0.301 coil ends - #10
//large 0.789, 0.322, -0.301 coil begins - #11
24
0.789,	0.116,	-0.521,	0.751,	0.173,	-0.560
0.751,	0.173,	-0.560,	0.716,	0.240,	-0.581
0.716,	0.240,	-0.581,	0.685,	0.312,	-0.583
0.685,	0.312,	-0.583,	0.662,	0.385,	-0.566
0.662,	0.385,	-0.566,	0.647,	0.454,	-0.531
0.647,	0.454,	-0.531,	0.642,	0.514,	-0.480
0.642,	0.514,	-0.480,	0.647,	0.561,	-0.417
0.647,	0.561,	-0.417,	0.662,	0.591,	-0.346
0.662,	0.591,	-0.346,	0.685,	0.603,	-0.272
0.685,	0.603,	-0.272,	0.716,	0.596,	-0.200
0.716,	0.596,	-0.200,	0.751,	0.570,	-0.135
0.751,	0.570,	-0.135,	0.789,	0.528,	-0.081
0.789,	0.528,	-0.081,	0.827,	0.471,	-0.042
0.827,	0.471,	-0.042,	0.862,	0.404,	-0.021
0.862,	0.404,	-0.021,	0.893,	0.332,	-0.019
0.893,	0.332,	-0.019,	0.916,	0.259,	-0.036
0.916,	0.259,	-0.036,	0.931,	0.190,	-0.071
0.931,	0.190,	-0.071,	0.936,	0.130,	-0.122
0.936,	0.130,	-0.122,	0.931,	0.083,	-0.185
0.931,	0.083,	-0.185,	0.916,	0.053,	-0.256
0.916,	0.053,	-0.256,	0.893,	0.041,	-0.330
0.893,	0.041,	-0.330,	0.862,	0.048,	-0.402
0.862,	0.048,	-0.402,	0.827,	0.074,	-0.467
0.827,	0.074,	-0.467,	0.789,	0.116,	-0.521
//large 0.789, 0.322, -0.301 coil ends - #11
//large -0.789, -0.322, 0.301 coil begins - #12
24
-0.789,	-0.118,	0.521,	-0.827,	-0.075,	0.467
-0.827,	-0.075,	0.467,	-0.862,	-0.049,	0.402
-0.862,	-0.049,	0.402,	-0.893,	-0.042,	0.330
-0.893,	-0.042,	0.330,	-0.916,	-0.054,	0.256
-0.916,	-0.054,	0.256,	-0.931,	-0.084,	0.185
-0.931,	-0.084,	0.185,	-0.936,	-0.131,	0.122
-0.936,	-0.131,	0.122,	-0.931,	-0.190,	0.071
-0.931,	-0.190,	0.071,	-0.916,	-0.259,	0.036
-0.916,	-0.259,	0.036,	-0.893,	-0.332,	0.019
-0.893,	-0.332,	0.019,	-0.862,	-0.405,	0.021
-0.862,	-0.405,	0.021,	-0.827,	-0.471,	0.042
-0.827,	-0.471,	0.042,	-0.789,	-0.528,	0.081
-0.789,	-0.528,	0.081,	-0.751,	-0.571,	0.135
-0.751,	-0.571,	0.135,	-0.716,	-0.597,	0.200
-0.716,	-0.597,	0.200,	-0.685,	-0.604,	0.272
-0.685,	-0.604,	0.272,	-0.662,	-0.592,	0.346
-0.662,	-0.592,	0.346,	-0.647,	-0.562,	0.417
-0.647,	-0.562,	0.417,	-0.642,	-0.515,	0.480
-0.642,	-0.515,	0.480,	-0.647,	-0.456,	0.531
-0.647,	-0.456,	0.531,	-0.662,	-0.387,	0.566
-0.662,	-0.387,	0.566,	-0.685,	-0.314,	0.583
-0.685,	-0.314,	0.583,	-0.716,	-0.241,	0.581
-0.716,	-0.241,	0.581,	-0.751,	-0.175,	0.560
-0.751,	-0.175,	0.560,	-0.789,	-0.118,	0.521
//large -0.789, -0.322, 0.301 coil ends - #12
//large 0.674, 0.522, 0.301 coil begins - #13
24
0.674,	0.672,	0.040,	0.622,	0.718,	0.078
0.622,	0.718,	0.078,	0.574,	0.749,	0.131
0.574,	0.749,	0.131,	0.532,	0.766,	0.196
0.532,	0.766,	0.196,	0.500,	0.766,	0.268
0.500,	0.766,	0.268,	0.480,	0.749,	0.342
0.480,	0.749,	0.342,	0.473,	0.716,	0.413
0.473,	0.716,	0.413,	0.480,	0.671,	0.477
0.480,	0.671,	0.477,	0.500,	0.615,	0.528
0.500,	0.615,	0.528,	0.532,	0.553,	0.565
0.532,	0.553,	0.565,	0.574,	0.489,	0.583
0.574,	0.489,	0.583,	0.622,	0.427,	0.582
0.622,	0.427,	0.582,	0.674,	0.372,	0.562
0.674,	0.372,	0.562,	0.726,	0.326,	0.524
0.726,	0.326,	0.524,	0.774,	0.295,	0.471
0.774,	0.295,	0.471,	0.816,	0.278,	0.406
0.816,	0.278,	0.406,	0.848,	0.278,	0.334
0.848,	0.278,	0.334,	0.868,	0.295,	0.260
0.868,	0.295,	0.260,	0.875,	0.328,	0.189
0.875,	0.328,	0.189,	0.868,	0.373,	0.125
0.868,	0.373,	0.125,	0.848,	0.429,	0.074
0.848,	0.429,	0.074,	0.816,	0.491,	0.037
0.816,	0.491,	0.037,	0.774,	0.555,	0.019
0.774,	0.555,	0.019,	0.726,	0.617,	0.020
0.726,	0.617,	0.020,	0.674,	0.672,	0.040
//large 0.674, 0.522, 0.301 coil ends - #13
//large -0.674, -0.522, -0.301 coil begins - #14
24
-0.674,	-0.672,	-0.040,	-0.726,	-0.617,	-0.020
-0.726,	-0.617,	-0.020,	-0.774,	-0.555,	-0.019
-0.774,	-0.555,	-0.019,	-0.816,	-0.491,	-0.037
-0.816,	-0.491,	-0.037,	-0.848,	-0.429,	-0.074
-0.848,	-0.429,	-0.074,	-0.868,	-0.373,	-0.125
-0.868,	-0.373,	-0.125,	-0.875,	-0.328,	-0.189
-0.875,	-0.328,	-0.189,	-0.868,	-0.295,	-0.260
-0.868,	-0.295,	-0.260,	-0.848,	-0.278,	-0.334
-0.848,	-0.278,	-0.334,	-0.816,	-0.278,	-0.406
-0.816,	-0.278,	-0.406,	-0.774,	-0.295,	-0.471
-0.774,	-0.295,	-0.471,	-0.726,	-0.326,	-0.524
-0.726,	-0.326,	-0.524,	-0.674,	-0.372,	-0.562
-0.674,	-0.372,	-0.562,	-0.622,	-0.427,	-0.582
-0.622,	-0.427,	-0.582,	-0.574,	-0.489,	-0.583
-0.574,	-0.489,	-0.583,	-0.532,	-0.553,	-0.565
-0.532,	-0.553,	-0.565,	-0.500,	-0.615,	-0.528
-0.500,	-0.615,	-0.528,	-0.480	-0.671,	-0.477
-0.480,	-0.671,	-0.477,	-0.473,	-0.716,	-0.413
-0.473,	-0.716,	-0.413,	-0.480,	-0.749,	-0.342
-0.480,	-0.749,	-0.342,	-0.500,	-0.766,	-0.268
-0.500,	-0.766,	-0.268,	-0.532,	-0.766,	-0.196
-0.532,	-0.766,	-0.196,	-0.574,	-0.749,	-0.131
-0.574,	-0.749,	-0.131,	-0.622,	-0.718,	-0.078
-0.622,	-0.718,	-0.078,  -0.674,	-0.672,  -0.040
//large -0.674, -0.522, -0.301 coil ends - #14
//large 0.115, 0.845, 0.301 coil begins - #15
24
0.115,	0.946,	0.017,	0.038,	0.952,	0.030
0.038,	0.952,	0.030,	-0.034,	0.950,	0.062
-0.038,	0.950,	0.062,	-0.096,	0.942,	0.110
-0.096,	0.942,	0.110,	-0.144,	0.927,	0.170
-0.144,	0.927,	0.170,	-0.173,	0.906,	0.240
-0.173,	0.906,	0.240,	-0.184,	0.881,	0.314
-0.184,	0.881,	0.314,	-0.173,	0.854,	0.387
-0.173,	0.854,	0.387,	-0.144,	0.826,	0.454
-0.144,	0.826,	0.454,	-0.096,	0.799,	0.511
-0.096,	0.799,	0.511,	-0.034,	0.776,	0.553
-0.034,	0.776,	0.553,	0.038,	0.757,	0.578
0.038,	0.757,	0.578,	0.115,	0.744,	0.585
0.115,	0.744,	0.585,	0.192,	0.738,	0.572
0.192,	0.738,	0.572,	0.264,	0.740,	0.540
0.264,	0.740,	0.540,	0.326,	0.748,	0.492
0.326,	0.748,	0.492,	0.374,	0.763,	0.432
0.374,	0.763,	0.432,	0.403,	0.784,	0.362
0.403,	0.784,	0.362,	0.414,	0.809,	0.288
0.414,	0.809,	0.288,	0.403,	0.836,	0.215
0.403,	0.836,	0.215,	0.374,	0.864,	0.148
0.374,	0.864,	0.148,	0.326,	0.891,	0.091
0.326,	0.891,	0.091,	0.264,	0.914,	0.049
0.264,	0.914,	0.049,	0.192,	0.933,	0.024
0.192,	0.933,	0.024,	0.115,	0.946,	0.017
//large 0.115, 0.845, 0.301 coil ends - #15
//large -0.115, -0.844, -0.301 coil begins - #16
24
-0.115,	-0.945,	-0.017,	-0.192,	-0.932,	-0.024
-0.192,	-0.932,	-0.024,	-0.264,	-0.914,	-0.049
-0.264,	-0.914,	-0.049,	-0.326,	-0.890,	-0.091
-0.326,	-0.890,	-0.091,	-0.374,	-0.863,	-0.148
-0.374,	-0.863,	-0.148,	-0.403,	-0.835,	-0.215
-0.403,	-0.835,	-0.215,	-0.414,	-0.808,	-0.288
-0.414,	-0.808,	-0.288,	-0.403,	-0.783,	-0.362
-0.403,	-0.783,	-0.362,	-0.374,	-0.762,	-0.432
-0.374,	-0.762,	-0.432,	-0.326,	-0.747,	-0.492
-0.326,	-0.747,	-0.492,	-0.264,	-0.738,	-0.540
-0.264,	-0.738,	-0.540,	-0.192,	-0.737,	-0.572
-0.192,	-0.737,	-0.572,	-0.115,	-0.743,	-0.585
-0.115,	-0.743,	-0.585,	-0.038,	-0.756,	-0.578
-0.038,	-0.756,	-0.578,	0.034,	-0.774,	-0.553
0.034,	-0.774,	-0.553,	0.096,	-0.798,	-0.511
0.096,	-0.798,	-0.511,	0.144,	-0.825,	-0.454
0.144,	-0.825,	-0.454,	0.173,	-0.853,	-0.387
0.173,	-0.853,	-0.387,	0.184,	-0.880,	-0.314
0.184,	-0.880,	-0.314,	0.173,	-0.905,	-0.240
0.173,	-0.905,	-0.240,	0.144,	-0.926,	-0.170
0.144,	-0.926,	-0.170,	0.096,	-0.941,	-0.110
0.096,	-0.941,	-0.110,	0.034,	-0.950,	-0.062
0.034,	-0.950,	-0.062,	-0.038,	-0.951,	-0.030
-0.038,	-0.951,	-0.030,	-0.115,	-0.945,	-0.017
//large -0.115, -0.844, -0.301 coil ends - #16
//large 0.674, -0.522, 0.301 coil begins - #17
24
0.674,	-0.372,	0.562,	0.622,	-0.427,	0.582
0.622,	-0.427,	0.582,	0.574,	-0.489,	0.583
0.574,	-0.489,	0.583,	0.532,	-0.553,	0.565
0.532,	-0.553,	0.565,	0.500,	-0.615,	0.528
0.500,	-0.615,	0.528,	0.480,	-0.671,	0.477
0.480,	-0.671,	0.477,	0.473,	-0.716,	0.413
0.473,	-0.716,	0.413,	0.480,	-0.749,	0.342
0.480,	-0.749,	0.342,	0.500,	-0.766,	0.268
0.500,	-0.766,	0.268,	0.532,	-0.766,	0.196
0.532,	-0.766,	0.196,	0.574,	-0.749,	0.131
0.574,	-0.749,	0.131,	0.622,	-0.718,	0.078
0.622,	-0.718,	0.078,	0.674,	-0.672,	0.040
0.674,	-0.672,	0.040,	0.726,	-0.617,	0.020
0.726,	-0.617,	0.020,	0.774,	-0.555,	0.019
0.774,	-0.555,	0.019,	0.816,	-0.491,	0.037
0.816,	-0.491,	0.037,	0.848,	-0.429,	0.074
0.848,	-0.429,	0.074,	0.868,	-0.373,	0.125
0.868,	-0.373,	0.125,	0.875,	-0.328,	0.189
0.875,	-0.328,	0.189,	0.868,	-0.295,	0.260
0.868,	-0.295,	0.260,	0.848,	-0.278,	0.334
0.848,	-0.278,	0.334,	0.816,	-0.278,	0.406
0.816,	-0.278,	0.406,	0.774,	-0.295,	0.471
0.774,	-0.295,	0.471,	0.726,	-0.326,	0.524
0.726,	-0.326,	0.524,	0.674,	-0.372,	0.562
//large 0.674, -0.522, 0.301 coil ends - #17
//large -0.674, 0.522, -0.301 coil begins - #18
24
-0.674,	0.372,	-0.562,	-0.726,	0.326,	-0.524
-0.726,	0.326,	-0.524,	-0.774,	0.295,	-0.471
-0.774,	0.295,	-0.471,	-0.816,	0.278,	-0.406
-0.816,	0.278,	-0.406,	-0.848,	0.278,	-0.334
-0.848,	0.278,	-0.334,	-0.868,	0.295,	-0.260
-0.868,	0.295,	-0.260,	-0.875,	0.328,	-0.189
-0.875,	0.328,	-0.189,	-0.868,	0.373,	-0.125
-0.868,	0.373,	-0.125,	-0.848,	0.429,	-0.074
-0.848,	0.429,	-0.074,	-0.816,	0.491,	-0.037
-0.816,	0.491,	-0.037,	-0.774,	0.555,	-0.019
-0.774,	0.555,	-0.019,	-0.726,	0.617,	-0.020
-0.726,	0.617,	-0.020,	-0.674,	0.672,	-0.040
-0.674,	0.672,	-0.040,	-0.622,	0.718,	-0.078
-0.622,	0.718,	-0.078,	-0.574,	0.749,	-0.131
-0.574,	0.749,	-0.131,	-0.532,	0.766,	-0.196
-0.532,	0.766,	-0.196,	-0.500,	0.766,	-0.268
-0.500,	0.766,	-0.268,	-0.480,	0.749,	-0.342
-0.480,	0.749,	-0.342,	-0.473,	0.716,	-0.413
-0.473,	0.716,	-0.413,	-0.480,	0.671,	-0.477
-0.480,	0.671,	-0.477,	-0.500,	0.615,	-0.528
-0.500,	0.615,	-0.528,	-0.532,	0.553,	-0.565
-0.532,	0.553,	-0.565,	-0.574,	0.489,	-0.583
-0.574,	0.489,	-0.583,	-0.622,	0.427,	-0.582
-0.622,	0.427,	-0.582,	-0.674,  0.372,	-0.562
//large -0.674, 0.522, -0.301 coil ends - #18
//large -0.115, 0.844, -0.301 coil begins - #19
24
-0.115,	0.743,	-0.585,	-0.192,	0.737,	-0.572
-0.192,	0.737,	-0.572,	-0.264,	0.738,	-0.540
-0.264,	0.738,	-0.540,	-0.326,	0.747,	-0.492
-0.326,	0.747,	-0.492,	-0.374,	0.762,	-0.432
-0.374,	0.762,	-0.432,	-0.403,	0.783,	-0.362
-0.403,	0.783,	-0.362,	-0.414,	0.808,	-0.288
-0.414,	0.808,	-0.288,	-0.403,	0.835,	-0.215
-0.403,	0.835,	-0.215,	-0.374,	0.863,	-0.148
-0.374,	0.863,	-0.148,	-0.326,	0.890,	-0.091
-0.326,	0.890,	-0.091,	-0.264,	0.914,	-0.049
-0.264,	0.914,	-0.049,	-0.192,	0.932,	-0.024
-0.192,	0.932,	-0.024,	-0.115,	0.945,	-0.017
-0.115,	0.945,	-0.017,	-0.038,	0.951,	-0.030
-0.038,	0.951,	-0.030,	0.034,	0.950,	-0.062
0.034,	0.950,	-0.062,	0.096,	0.941,	-0.110
0.096,	0.941,	-0.110,	0.144,	0.926,	-0.170
0.144,	0.926,	-0.170,	0.173,	0.905,	-0.240
0.173,	0.905,	-0.240,	0.184,	0.880,	-0.314
0.184,	0.880,	-0.314,	0.173,	0.853,	-0.387
0.173,	0.853,	-0.387,	0.144,	0.825,	-0.454
0.144,	0.825,	-0.454,	0.096,	0.798,	-0.511
0.096,	0.798,	-0.511,	0.034,	0.774,	-0.553
0.034,	0.774,	-0.553,	-0.038,	0.756,	-0.578
-0.038,	0.756,	-0.578,   -0.115,	0.743, 	-0.585
//large -0.115, 0.844, -0.301 coil ends - #19
//large 0.115, -0.845, 0.301 coil begins - #20
24
0.115,	-0.754,	0.585,	0.038,	-0.767,	0.578
0.038,	-0.767,	0.578,	-0.034,	-0.785,	0.553
-0.034,	-0.785,	0.553,	-0.096,	-0.809,	0.511
-0.096,	-0.809,	0.511,	-0.144,	-0.835,	0.454
-0.144,	-0.835,	0.454,	-0.173,	-0.863,	0.387
-0.173,	-0.863,	0.387,	-0.184,	-0.890,	0.314
-0.184,	-0.890,	0.314,	-0.173,	-0.914,	0.240
-0.173,	-0.914,	0.240,	-0.144,	-0.935,	0.170
-0.144,	-0.935,	0.170,	-0.096,	-0.950,	0.109
-0.096,	-0.950,	0.109,	-0.034,	-0.959,	0.061
-0.034,	-0.959,	0.061,	0.038,	-0.960,	0.030
0.038,	-0.960,	0.030,	0.115,	-0.954,	0.017
0.115,	-0.954,	0.017,	0.192,	-0.941,	0.024
0.192,	-0.941,	0.024,	0.264,	-0.923,	0.049
0.264,	-0.923,	0.049,	0.326,	-0.899,	0.091
0.326,	-0.899,	0.091,	0.374,	-0.873,	0.148
0.374,	-0.873,	0.148,	0.403,	-0.845,	0.215
0.403,	-0.845,	0.215,	0.414,	-0.818,	0.288
0.414,	-0.818,	0.288,	0.403,	-0.794,	0.362
0.403,	-0.794,	0.362,	0.374,	-0.773,	0.432
0.374,	-0.773,	0.432,	0.326,	-0.758,	0.493
0.326,	-0.758,	0.493,	0.264,	-0.749,	0.541
0.264,	-0.749,	0.541,	0.192,	-0.748,	0.572
0.192,	-0.748,	0.572,	0.115,	-0.754,	0.585
//large 0.115, -0.845, 0.301 coil ends - #20 
These segments were semi-automatically generated. I'm curious if the additional spaces are a difficulty and if the segment generator is consistent in current direction. I have already tested the segment generator on earlier work, so I'm reasonably confident the points are correct.
"Aqaba! By Land!" T. E. Lawrence

R. Peters

rjaypeters
Posts: 869
Joined: Fri Aug 20, 2010 2:04 pm
Location: Summerville SC, USA

Post by rjaypeters »

Return to Coruscant (Part Deux): Image

Code: Select all

//Small ring circumferences, ideal - 1.307m, segmented = 1.296m
//small 0.912, 0.0, 0.174 coil begins -#21
16
0.912,	0.208,	0.174,	0.897,	0.192,	0.252
0.897,	0.192	0.252,	0.884,	0.147,	0.318
0.884,	0.147,	0.318,	0.876,	0.080,	0.363
0.876,	0.080,	0.363,	0.873,	0.000,	0.378
0.873,	0.000,	0.378,	0.876,	-0.080,	0.363
0.876,	-0.080,	0.363,	0.884,	-0.147,	0.318
0.884,	-0.147,	0.318,	0.897,	-0.192,	0.252
0.897,	-0.192,	0.252,	0.912,	-0.208,	0.174
0.912,	-0.208,	0.174,	0.927,	-0.192,	0.096
0.927,	-0.192,	0.096,	0.940,	-0.147,	0.030
0.940,	-0.147,	0.030,	0.948,	-0.080,	-0.015
0.948,	-0.080,	-0.015,	0.951,	0.000,	-0.030
0.951,	0.000,	-0.030,	0.948,	0.080,	-0.015
0.948,	0.080,	-0.015,	0.940,	0.147,	0.030
0.940,	0.147,	0.030,	0.927,	0.192,	0.096
0.927,	0.192,	0.096,	0.912,	0.208,	0.174
//small 0.912, 0.0, 0.174 coil ends -#21
//small -0.912, 0.0, -0.174 coil begins -#22
16
-0.912,	-0.208,	-0.174,	-0.927,	-0.192,	-0.096
-0.927,	-0.192,	-0.096,	-0.940,	-0.147,	-0.030
-0.940,	-0.147,	-0.030,	-0.948,	-0.080,	0.015
-0.948,	-0.080,	0.015,	-0.951,	0.000,	0.030
-0.951,	0.000,	0.030,	-0.948,	0.080,	0.015
-0.948,	0.080,	0.015,	-0.940,	0.147,	-0.030
-0.940,	0.147,	-0.030,	-0.927,	0.192,	-0.096
-0.927,	0.192,	-0.096,	-0.912,	0.208,	-0.174
-0.912,	0.208,	-0.174,	-0.897,	0.192,	-0.252
-0.897,	0.192,	-0.252,	-0.884,	0.147,	-0.318
-0.884,	0.147,	-0.318,	-0.876,	0.080,	-0.363
-0.876,	0.080,	-0.363,	-0.873,	0.000,	-0.378
-0.873,	0.000,	-0.378,	-0.876,	-0.080,	-0.363
-0.876,	-0.080,	-0.363,	-0.884,	-0.147,	-0.318
-0.884,	-0.147,	-0.318,	-0.897,	-0.192,	-0.252
-0.897,	-0.192,	-0.252,	-0.912,	-0.208,	-0.174
//small -0.912, 0.0, -0.174 coil ends -#22
//small 0.282, -0.489, 0.738 coil begins -#23
16
0.282,	-0.316,	0.853,	0.206,	-0.342,	0.864
0.206,	-0.342,	0.864,	0.142,	-0.391,	0.856
0.142,	-0.391,	0.856,	0.099,	-0.455,	0.831
0.099,	-0.455,	0.831,	0.084,	-0.524,	0.791
0.084,	-0.524,	0.791,	0.099,	-0.588,	0.743
0.099,	-0.588,	0.743,	0.142,	-0.636,	0.694
0.142,	-0.636,	0.694,	0.206,	-0.663,	0.652
0.206,	-0.663,	0.652,	0.282,	-0.662,	0.623
0.282,	-0.662,	0.623,	0.358,	-0.636,	0.612
0.358,	-0.636,	0.612,	0.422,	-0.587,	0.620
0.422,	-0.587,	0.620,	0.465,	-0.523,	0.645
0.465,	-0.523,	0.645,	0.480,	-0.454,	0.685
0.480,	-0.454,	0.685,	0.465,	-0.390,	0.733
0.465,	-0.390,	0.733,	0.422,	-0.342,	0.782
0.422,	-0.342,	0.782,	0.358,	-0.315,	0.824
0.358,	-0.315,	0.824,	0.282,	-0.316,	0.853
//small 0.282, -0.489, 0.738 coil ends -#23
//small -0.282, 0.488, -0.738 coil begins -#24
16
-0.282,	0.316,	-0.853,	-0.358,	0.315,	-0.824
-0.358,	0.315,	-0.824,	-0.422,	0.342,	-0.782
-0.422,	0.342,	-0.782,	-0.465,	0.390,	-0.733
-0.465,	0.390,	-0.733,	-0.480,	0.454,	-0.685
-0.480,	0.454,	-0.685,	-0.465,	0.523,	-0.645
-0.465,	0.523,	-0.645,	-0.422,	0.587,	-0.620
-0.422,	0.587,	-0.620,	-0.358,	0.636,	-0.612
-0.358,	0.636,	-0.612,	-0.282,	0.662,	-0.623
-0.282,	0.662,	-0.623,	-0.206,	0.663,	-0.652
-0.206,	0.663,	-0.652,	-0.142,	0.636,	-0.694
-0.142,	0.636,	-0.694,	-0.099,	0.588,	-0.743
-0.099,	0.588,	-0.743,	-0.084,	0.524,	-0.791
-0.084,	0.524,	-0.791,	-0.099,	0.455,	-0.831
-0.099,	0.455,	-0.831,	-0.142,	0.391,	-0.856
-0.142,	0.391,	-0.856,	-0.206,	0.342,	-0.864
-0.206,	0.342,	-0.864,	-0.282,	0.316,	-0.853
//small -0.282, 0.488, -0.738 coil ends -#24
//small 0.564, 0.0, -0.738 coil begins -#25
16
0.564,	-0.208,	-0.738,	0.501,	-0.192,	-0.786
0.501,	-0.192,	-0.786,	0.447,	-0.147,	-0.827
0.447,	-0.147,	-0.827,	0.411,	-0.080,	-0.855
0.411,	-0.080,	-0.855,	0.399,	0.000,	-0.864
0.399,	0.000,	-0.864,	0.411,	0.080,	-0.855
0.411,	0.080,	-0.855,	0.447,	0.147,	-0.827
0.447,	0.147,	-0.827,	0.501,	0.192,	-0.786
0.501,	0.192,	-0.786,	0.564,	0.208,	-0.738
0.564,	0.208,	-0.738,	0.627,	0.192,	-0.690
0.627,	0.192,	-0.690,	0.681,	0.147,	-0.649
0.681,	0.147,	-0.649,	0.717,	0.080,	-0.621
0.717,	0.080,	-0.621,	0.729,	0.000,	-0.612
0.729,	0.000,	-0.612,	0.717,	-0.080,	-0.621
0.717,	-0.080,	-0.621,	0.681,	-0.147,	-0.649
0.681,	-0.147,	-0.649,	0.627,	-0.192,	-0.690
0.627,	-0.192,	-0.690,  0.564,	-0.208,	-0.738
//small 0.564, 0.0, -0.738 coil ends -#25
//small -0.564, 0.0, 0.738 coil begins -#26
16
-0.564,	0.208,	0.738,	-0.627,	0.192,	0.690
-0.627,	0.192,	0.690,	-0.681,	0.147,	0.649
-0.681,	0.147,	0.649,	-0.717,	0.080,	0.621
-0.717,	0.080,	0.621,	-0.729,	0.000,	0.612
-0.729,	0.000,	0.612,	-0.717,	-0.080,	0.621
-0.717,	-0.080,	0.621,	-0.681,	-0.147,	0.649
-0.681,	-0.147,	0.649,	-0.627,	-0.192,	0.690
-0.627,	-0.192,	0.690,	-0.564,	-0.208,	0.738
-0.564,	-0.208,	0.738,	-0.501,	-0.192,	0.786
-0.501,	-0.192,	0.786,	-0.447,	-0.147,	0.827
-0.447,	-0.147,	0.827,	-0.411,	-0.080,	0.855
-0.411,	-0.080,	0.855,	-0.399,	0.000,	0.864
-0.399,	0.000,	0.864,	-0.411,	0.080,	0.855
-0.411,	0.080,	0.855,	-0.447,	0.147,	0.827
-0.447,	0.147,	0.827,	-0.501,	0.192,	0.786
-0.501,	0.192,	0.786,	-0.564,	0.208,	0.738
//small -0.564, 0.0, 0.738 coil ends -#26
//small 0.456, -0.790, -0.174 coil begins -#27
16
0.456,	-0.835,	0.029,	0.387,	-0.870,	0.005
0.387,	-0.870,	0.005,	0.328,	-0.892,	-0.046
0.328,	-0.892,	-0.046,	0.289,	-0.899,	-0.117
0.289,	-0.899,	-0.117,	0.275,	-0.890,	-0.196
0.275,	-0.890,	-0.196,	0.289,	-0.865,	-0.272
0.289,	-0.865,	-0.272,	0.328,	-0.829,	-0.333
0.328,	-0.829,	-0.333,	0.387,	-0.787,	-0.370
0.387,	-0.787,	-0.370,	0.456,	-0.745,	-0.377
0.456,	-0.745,	-0.377,	0.525,	-0.710,	-0.353
0.525,	-0.710,	-0.353,	0.584,	-0.688,	-0.302
0.584,	-0.688,	-0.302,	0.623,	-0.681,	-0.231
0.623,	-0.681,	-0.231,	0.637,	-0.690,	-0.152
0.637,	-0.690,	-0.152,	0.623,	-0.715,	-0.076
0.623,	-0.715,	-0.076,	0.584,	-0.751,	-0.015
0.584,	-0.751,	-0.015,	0.525,	-0.793,	0.022
0.525,	-0.793,   0.022,	0.456,	-0.835,	0.029
//small 0.456, -0.790, -0.174 coil ends -#27
//small -0.456, 0.790, 0.174 coil begins -#28
16
-0.456,	0.835,	-0.029,	-0.525,	0.793,	-0.022
-0.525,	0.793,	-0.022,	-0.584,	0.751,	0.015
-0.584,	0.751,	0.015,	-0.623,	0.715,	0.076
-0.623,	0.715,	0.076,	-0.637,	0.690,	0.152
-0.637,	0.690,	0.152,	-0.623,	0.681,	0.231
-0.623,	0.681,	0.231,	-0.584,	0.688,	0.302
-0.584,	0.688,	0.302,	-0.525,	0.710,	0.353
-0.525,	0.710,	0.353,	-0.456,	0.745,	0.377
-0.456,	0.745,	0.377,	-0.387,	0.787,	0.370
-0.387,	0.787,	0.370,	-0.328,	0.829,	0.333
-0.328,	0.829,	0.333,	-0.289,	0.865,	0.272
-0.289,	0.865,	0.272,	-0.275,	0.890,	0.196
-0.275,	0.890,	0.196,	-0.289,	0.899,	0.117
-0.289,	0.899,	0.117,	-0.328,	0.892,	0.046
-0.328,	0.892,	0.046,	-0.387,	0.870,	-0.005
-0.387,	0.870,	-0.005,	-0.456,	0.835,	-0.029
//small -0.456, 0.790, 0.174 coil ends -#28
//small -0.456, -0.790, 0.174 coil begins -#29
16
-0.456,	-0.745,	0.377,	-0.525,	-0.710,	0.353
-0.525,	-0.710,	0.353,	-0.584,	-0.688,	0.302
-0.584,	-0.688,	0.302,	-0.623,	-0.681,	0.231
-0.623,	-0.681,	0.231,	-0.637,	-0.690,	0.152
-0.637,	-0.690,	0.152,	-0.623,	-0.715,	0.076
-0.623,	-0.715,	0.076,	-0.584,	-0.751,	0.015
-0.584,	-0.751,	0.015,	-0.525,	-0.793,	-0.022
-0.525,	-0.793,	-0.022,	-0.456,	-0.835,	-0.029
-0.456,	-0.835,	-0.029,	-0.387,	-0.870,	-0.005
-0.387,	-0.870,	-0.005,	-0.328,	-0.892,	0.046
-0.328,	-0.892,	0.046,	-0.289,	-0.899,	0.117
-0.289,	-0.899,	0.117,	-0.275,	-0.890,	0.196
-0.275,	-0.890,	0.196,	-0.289,	-0.865,	0.272
-0.289,	-0.865,	0.272,	-0.328,	-0.829,	0.333
-0.328,	-0.829,	0.333,	-0.387,	-0.787,	0.370
-0.387,	-0.787,	0.370,	-0.456,	-0.745,	0.377
//small -0.456, -0.790, 0.174 coil ends -#29
//small 0.456, 0.790, -0.174 coil begins -#30
16
0.456,	0.745,	-0.377,	0.387,	0.787,	-0.370
0.387,	0.787,	-0.370,	0.328,	0.829,	-0.333
0.328,	0.829,	-0.333,	0.289,	0.865,	-0.272
0.289,	0.865,	-0.272,	0.275,	0.890,	-0.196
0.275,	0.890,	-0.196,	0.289,	0.899,	-0.117
0.289,	0.899,	-0.117,	0.328,	0.892,	-0.046
0.328,	0.892,	-0.046,	0.387,	0.870,	0.005
0.387,	0.870,	0.005,	0.456,	0.835,	0.029
0.456,	0.835,	0.029,	0.525,	0.793,	0.022
0.525,	0.793,	0.022,	0.584,	0.751,	-0.015
0.584,	0.751,	-0.015,	0.623,	0.715,	-0.076
0.623,	0.715,	-0.076,	0.637,	0.690,	-0.152
0.637,	0.690,	-0.152,	0.623,	0.681,	-0.231
0.623,	0.681,	-0.231,	0.584,	0.688,	-0.302
0.584,	0.688,	-0.302,	0.525,	0.710,	-0.353
0.525,	0.710,	-0.353,	0.456,	0.745,	-0.377
//small 0.456, 0.790, -0.174 coil ends -#30
//small 0.282, 0.489, 0.738 coil begins -#31
16
0.282,	0.662,	0.623,	0.206,	0.663,	0.652
0.206,	0.663,	0.652,	0.142,	0.636,	0.694
0.142,	0.636,	0.694,	0.099,	0.588,	0.743
0.099,	0.588,	0.743,	0.084,	0.524,	0.791
0.084,	0.524,	0.791,	0.099,	0.455,	0.831
0.099,	0.455,	0.831,	0.142,	0.391,	0.856
0.142,	0.391,	0.856,	0.206,	0.342,	0.864
0.206,	0.342,	0.864,	0.282,	0.316,	0.853
0.282,	0.316,	0.853,	0.358,	0.315,	0.824
0.358,	0.315,	0.824,	0.422,	0.342,	0.782
0.422,	0.342,	0.782,	0.465,	0.390,	0.733
0.465,	0.390,	0.733,	0.480,	0.454,	0.685
0.480,	0.454,	0.685,	0.465,	0.523,	0.645
0.465,	0.523,	0.645,	0.422,	0.587,	0.620
0.422,	0.587,	0.620,	0.358,	0.636,	0.612
0.358,	0.636,	0.612,	0.282,	0.662,	0.623
//small 0.282, 0.489, 0.738 coil ends -#31
//small -0.282, -0.488, -0.738 coil begins -#32
16
-0.282,	-0.661,	-0.623,	-0.358,	-0.635,	-0.612
-0.358,	-0.635,	-0.612,	-0.422,	-0.586,	-0.620
-0.422,	-0.586,	-0.620,	-0.465,	-0.522,	-0.645
-0.465,	-0.522,	-0.645,	-0.480,	-0.453,	-0.685
-0.480,	-0.453,	-0.685,	-0.465,	-0.389,	-0.733
-0.465,	-0.389,	-0.733,	-0.422,	-0.341,	-0.782
-0.422,	-0.341,	-0.782,	-0.358,	-0.314,	-0.824
-0.358,	-0.314,	-0.824,	-0.282,	-0.315,	-0.853
-0.282,	-0.315,	-0.853,	-0.206,	-0.341,	-0.864
-0.206,	-0.341,	-0.864,	-0.142,	-0.390,	-0.856
-0.142,	-0.390,	-0.856,	-0.099,	-0.454,	-0.831
-0.099,	-0.454,	-0.831,	-0.084,	-0.523,	-0.791
-0.084,	-0.523,	-0.791,	-0.099,	-0.587,	-0.743
-0.099,	-0.587,	-0.743,	-0.142,	-0.635,	-0.694
-0.142,	-0.635,	-0.694,	-0.206,	-0.662,	-0.652
-0.206,	-0.662,	-0.652,	-0.282,	-0.661,	-0.623
//small -0.282, -0.488, -0.738 coil ends -#32
A probably superfluous note: These coils are not the same length as the previous post.

Part One + Part Deux = Image
"Aqaba! By Land!" T. E. Lawrence

R. Peters

KitemanSA
Posts: 6114
Joined: Sun Sep 28, 2008 3:05 pm
Location: OlyPen WA

Post by KitemanSA »

Ok, now take this and make all the blues hexagons and all the reds pentagons and place them vertex to vertex (slight gap). All coils "North In". Virtual triangles will be "North Out". Almost PERFECT MaGrid. :D

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

KitemanSA wrote:Ok, now take this and make all the blues hexagons and all the reds pentagons and place them vertex to vertex (slight gap). All coils "North In". Virtual triangles will be "North Out". Almost PERFECT MaGrid. :D
it occured to me considering the orientation of the magnets, that as long as they all follow the "right hand rule", (or the left hand, so long as its the same), for a vector from the center to the midplane, they will all be correct. so presumably you could have sort of a nano-grid it you could induce that kind of coherent rotation about a spherical grid of fairly uniformly spaced points.

you could confine the position space by just having a charged point, so long as it's not conductive (cause then the electrons will just run into it and it would be lost) , and for this a simple atomic nucleus will suffice. so then the question remains, how do you fix the orientation of the currents? and that's where the idea of putting it in an energy gradient to induce bifurcation (ala dissipative structures) came in in the buckyball boosting thread.

but in any case that would be pretty cool to simulate - a nanogrid. you could just approximate each coil by a square and of course you'd have to write some kind of program to generate it.

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

i've turned on the wire loss radius. so then the question comes in - what is the minor radius of the coils; what should the wire radius be, say for a 15cm radius polywell?

rjaypeters
Posts: 869
Joined: Fri Aug 20, 2010 2:04 pm
Location: Summerville SC, USA

Post by rjaypeters »

KitemanSA wrote:Ok, now take this and make all the blues hexagons and all the reds pentagons and place them vertex to vertex (slight gap). All coils "North In". Virtual triangles will be "North Out". Almost PERFECT MaGrid. :D
I can do as you suggest, but do you want a "non-practical" configuration that does not include casing thickness and bend radius?
happyjack27 wrote:i've turned on the wire loss radius...
Ignorance revealed: what is wire loss radius?
"Aqaba! By Land!" T. E. Lawrence

R. Peters

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

rjaypeters wrote:
happyjack27 wrote:i've turned on the wire loss radius...
Ignorance revealed: what is wire loss radius?
i.e. how thick are the coils?

KitemanSA
Posts: 6114
Joined: Sun Sep 28, 2008 3:05 pm
Location: OlyPen WA

Post by KitemanSA »

rjaypeters wrote:
KitemanSA wrote:Ok, now take this and make all the blues hexagons and all the reds pentagons and place them vertex to vertex (slight gap). All coils "North In". Virtual triangles will be "North Out". Almost PERFECT MaGrid. :D
I can do as you suggest, but do you want a "non-practical" configuration that does not include casing thickness and bend radius?
As a first cut, I'd make the coild radius (minor radius) ~1/10 of the major radius and the vertex curve of sufficient radius to allow ~1/8 minor radius between coils.

The actual seperation needed is 8-10 gyro-radii but until I know how many amp-turns there are and the mag field strength, I couldn't determine the gyro-radius. :)

happyjack27
Posts: 1438
Joined: Wed Jul 14, 2010 5:27 pm

Post by happyjack27 »

KitemanSA wrote:
rjaypeters wrote:
KitemanSA wrote:Ok, now take this and make all the blues hexagons and all the reds pentagons and place them vertex to vertex (slight gap). All coils "North In". Virtual triangles will be "North Out". Almost PERFECT MaGrid. :D
I can do as you suggest, but do you want a "non-practical" configuration that does not include casing thickness and bend radius?
As a first cut, I'd make the coild radius (minor radius) ~1/10 of the major radius and the vertex curve of sufficient radius to allow ~1/8 minor radius between coils.

The actual seperation needed is 8-10 gyro-radii but until I know how many amp-turns there are and the mag field strength, I couldn't determine the gyro-radius. :)
mag field strength is a function of ampturns, grid size, and where you're measuring it from.

and amp turns can be varied freely in the sim.
so perhaps what we need is a formula here, not a number.

something like f(coil separation,amp turns,magrid inscribed spherical radius,coil major radius, coil thickness (minor radius)) = 0

though we want practicaly coil radiuses. so perhaps the question is what is a practical coil radius for a given amount of max. amp turns, and then given those two figures what is the coil separation?

or for now, perhaps, simply what was the coil minor radius on the wb-6? since i'm running at the size and amp turns right now i can use that for now.

Post Reply