Page 1 of 1

New Post is Up!

Posted: Mon Oct 22, 2012 12:13 pm
by mattman
New Post is Up: "The Public Plea"!

Check it out... ... -plea.html

Blog is at 29,856 Page Views... ~60 hits a day!!!

Post Summary:
This post is a hodgepodge of ideas. First, is an attempt to write a “mission statement” for the community based on a survey of 409 posts on the talk-polywell implications thread. Quotes are included. Next, is a discussion of Bill Flints’ Polywell site and some highlights from the 2012 IEC conference. The fusor and the machine mechanism are both brief referenced. Machine scale up is discussed, using reaction cross sections and the volumetric fusion equation. Because of the Lawson criteria, efforts to raise machines’ efficiency as opposed to plasma density or heat, should be pursued. Efficiency may be raised by x-ray reflection, increasing electron and ion recirculation, reducing energy input, and using direct conversion to capture energy. Occam's razor is used to argue for this machine, as it currently makes fewer assumptions then other ideas. Lastly, a call for a MCNP simulation and dimensional analysis of the Polywell using eight dimensionless ratios, is made. The hope is that modes of operation, or a resonance condition, may be found.