Any polywell news?

Point out news stories, on the net or in mainstream media, related to polywell fusion.

Moderators: tonybarry, MSimon

mvanwink5
Posts: 2172
Joined: Wed Jul 01, 2009 5:07 am
Location: N.C. Mountains

Post by mvanwink5 »

On the serious side, I can understand extreme curiosity in what is going on, but as for myself, my respect for folks doing their job trumps even extreme curiosity. No sense in crowding or distracting folks doing the work. Just my own point of view.

Best regards
Counting the days to commercial fusion. It is not that long now.

cuddihy
Posts: 155
Joined: Sat Jun 30, 2007 5:11 pm

Post by cuddihy »

Tom Ligon wrote:The one little tidbit I'll offer is that they no longer leave their garage bay door open. Evidently some people were nosy!

Other than that, I'll say it is really shiny.

And that's all you get from me.

My theory on "shininess" which also covers why the funds are being used so slowly; shortly after a big first group of tests were done, a problem emerged with how the polywell works, not an insurmountable one, but a tough one that could not be found until after the new diagnostics and resolution of WB 8.0 were up and running.

Candidate problems include problems with electron or ion flow coupling to vacuum chamber walls or faraday cage around the polywell.

Another possibility that involves shiny would be electron loss to non-protected surfaces--like the ceramic or teflon coil standoffs previous Polywells have used.

Anyway, changing that kind of stuff, especially if it involved magnetically insulating standoffs, would not be budget busting but would definitely be time consuming.
Tom.Cuddihy

~~~~~~~~~~~~~~~~~~~~~
Faith is the foundation of reason.

rjaypeters
Posts: 869
Joined: Fri Aug 20, 2010 2:04 pm
Location: Summerville SC, USA

Post by rjaypeters »

Other area of speculation: Why did someone (presumably EMC2) invite Tom Ligon to see the current machine? What technical issues require Tom's expertise? Given Tom's bent to writing, perhaps EMC2 is getting ready to publish results in more popular media (e.g. Analog)?
"Aqaba! By Land!" T. E. Lawrence

R. Peters

Betruger
Posts: 2327
Joined: Tue May 06, 2008 11:54 am

Post by Betruger »

Or maybe Tom got to check it out from his own incentive.. Occam's and all.

bennmann
Posts: 244
Joined: Sun May 17, 2009 5:56 pm
Location: Southeast US

Post by bennmann »

There was another poster that posted he saw WB8 from the street, struck up a friendly conversation, and promptly signed an NDA...

I might have to go find his posts again. Perhaps that's what inspired Tom to do the same?

Tom Ligon
Posts: 1871
Joined: Wed Aug 22, 2007 1:23 am
Location: Northern Virginia
Contact:

Post by Tom Ligon »

Another possibility is that I've signed a series of NDAs over the years, in order to be allowed to visit. And if I want to in the future I need to honor them.

I did figure I could save you guys the bother of hanging around the garage door, though.

I had a standing invitation, and took advantage of my wife wanting to visit San Diego again to make a visit to the new lab the high point of my vacation. The official excuse was to turn over some of my notes to help decipher some old data dating way back before any of the present crew were on hand. Nothing earth-shaking.

I'll share this much. I'm quite impressed with Dr. Park, and convinced he is approaching the project with the proper scientific mindset ... skeptical and demanding reviewable proof. I would expect you won't get anything speculative out of him. I think the right team is on the job.

TallDave
Posts: 3152
Joined: Wed Jul 25, 2007 7:12 pm
Contact:

Post by TallDave »

Good enough for me, Tom.

Hoping for a great 2012 in fusion!
n*kBolt*Te = B**2/(2*mu0) and B^.25 loss scaling? Or not so much? Hopefully we'll know soon...

Betruger
Posts: 2327
Joined: Tue May 06, 2008 11:54 am

Post by Betruger »

Yep that sounds very good.

Ivy Matt
Posts: 712
Joined: Sat May 01, 2010 6:43 am

Post by Ivy Matt »

Tom Ligon wrote:I'll share this much. I'm quite impressed with Dr. Park, and convinced he is approaching the project with the proper scientific mindset ... skeptical and demanding reviewable proof. I would expect you won't get anything speculative out of him. I think the right team is on the job.
Sounds good, but I hope you didn't just reveal a trade secret. :wink:
Temperature, density, confinement time: pick any two.

Coolbrucelong
Posts: 14
Joined: Fri Nov 27, 2009 3:09 am
Location: PA USA

Post by Coolbrucelong »

Snark warning


I think the right team is on the job.

That my friends I think Is the trade secret.


I ask you, how many times does industry or government manage to put the right people on the job?

Just asking.
Optimist: Glass is half full
Pessimist: Glass is half empty
Engineer: Someone made that glass twice
as large as it needs to be.

choff
Posts: 2447
Joined: Thu Nov 08, 2007 5:02 am
Location: Vancouver, Canada

Post by choff »

I like the shiny part, that means it gives you the same feeling looking at the classic Ford Mustang, a work of art.
CHoff

Tom Ligon
Posts: 1871
Joined: Wed Aug 22, 2007 1:23 am
Location: Northern Virginia
Contact:

Post by Tom Ligon »

Come to think of it, it was kinda like looking at a shiny new sports car. :D

Tho', if I were talking about a lot of shiny stainless steel, a Delorean might be a better analogy. I mean, all other factors aside, a Delorean in showroom condition was something to see.

For classics and shiny, there's this mint-condition DC-3 in the avionics department hangar at Ohio University that I've admired for hours when visiting. Full polish ... a workhorse that they also show off.

krenshala
Posts: 914
Joined: Wed Jul 16, 2008 4:20 pm
Location: Austin, TX, NorAm, Sol III

Post by krenshala »

Considering how many DC-3s are still in use, I'm hoping the Polywell sees that kind of service. ;)

dweigert
Posts: 24
Joined: Tue Sep 11, 2007 1:09 am

Post by dweigert »

I was a student at Ohio U. and remember seeing it. They also have one of the largest Van De Graff accelerators in the world there.

CaptainBeowulf
Posts: 498
Joined: Sat Nov 07, 2009 12:35 am

Post by CaptainBeowulf »

I found the Bockscar to be very shiny when I visited the USAF museum in Dayton. Literally, shiny, even more than a DC-3, but maybe I haven't seen any really shiny DC-3s.

Don't Deloreans come up on Ebay and similar sites every once in a while? I wonder how much restoring one would cost...

Post Reply