Discuss the technical details of an "open source" community-driven design of a polywell reactor.
	Moderators:  tonybarry , MSimon 
			
		
		
			
				
																			
								MSimon 							 
									
		Posts:  14335  		Joined:  Mon Jul 16, 2007 7:37 pm 		
		
																Location:  Rockford, Illinois 
							
							
				Contact: 
				
			 
				
		 
		
						
						
													
							
						
									
						Post 
					 
								by MSimon   »  Sun May 25, 2008 1:59 pm 
			
			
			
			
			
			
			
									
									Engineering is the art of making what you want from what you can get at a profit. 
						 
		 
				
		
		 
	 
	 
				
		
		
			
				
																			
								Billy Catringer 							 
									
		Posts:  221  		Joined:  Mon Feb 02, 2009 2:32 pm 		
		
											Location:  Texas 
							
						
		 
		
						
						 
													
							
						
									
						Post 
					 
								by Billy Catringer   »  Thu Feb 05, 2009 12:30 pm 
			
			
			
			
			The video does not show the necessary annealing steps in the process, but they may be annealing on the fly. Both copper and nickel have the nasty habit of work hardening.
			
			
									
									
						 
		 
				
		
		 
	 
	 
				
		
		
			
				
																			
								KitemanSA 							 
									
		Posts:  6192  		Joined:  Sun Sep 28, 2008 3:05 pm 		
		
											Location:  OlyPen WA 
							
						
		 
		
						
						 
													
							
						
									
						Post 
					 
								by KitemanSA   »  Thu Feb 05, 2009 1:31 pm 
			
			
			
			
			Neat video, but this is what American Superconductors calls 1st generation wire.  Their 2nd generation wire basically has better properties in all areas. 
 
Of course, AmSC make HTS, (BSCCO, YBCO) not MgB2 ; though the issues may be the same.
			
			
									
									
						 
		 
				
		
		 
	 
	 
				
		
		
			
				
																			
								Billy Catringer 							 
									
		Posts:  221  		Joined:  Mon Feb 02, 2009 2:32 pm 		
		
											Location:  Texas 
							
						
		 
		
						
						 
													
							
						
									
						Post 
					 
								by Billy Catringer   »  Thu Feb 05, 2009 5:43 pm 
			
			
			
			
			If they are using nickel and copper in the new composites, they have to do some annealing along the way during fabrication.  I am surprised that they do not offer some of these with silver cores instead of copper.
			
			
									
									
						 
		 
				
		
		 
	 
	 
				
		
		
			
				
																			
								MSimon 							 
									
		Posts:  14335  		Joined:  Mon Jul 16, 2007 7:37 pm 		
		
																Location:  Rockford, Illinois 
							
							
				Contact: 
				
			 
				
		 
		
						
						 
													
							
						
									
						Post 
					 
								by MSimon   »  Thu Feb 05, 2009 7:19 pm 
			
			
			
			
			MgB has "metalic" mechanical properties and has good neutron resistance. Its neutron resistance could be increased if it was made with pure B11.
			
			
									
									Engineering is the art of making what you want from what you can get at a profit. 
						 
		 
				
		
		 
	 
	 
				
		
		
			
				
																			
								KitemanSA 							 
									
		Posts:  6192  		Joined:  Sun Sep 28, 2008 3:05 pm 		
		
											Location:  OlyPen WA 
							
						
		 
		
						
						 
													
							
						
									
						Post 
					 
								by KitemanSA   »  Thu Feb 05, 2009 7:29 pm 
			
			
			
			
			MSimon wrote: ...Its neutron resistance could be increased if it was made with pure B11.
?? Shouldn't that be B10 which can absorb a neutron and remain Boron?  Admittedly, I am outside my field here.
 
			
			
									
									
						 
		 
				
		
		 
	 
	 
				
		
		
			
				
																			
								Billy Catringer 							 
									
		Posts:  221  		Joined:  Mon Feb 02, 2009 2:32 pm 		
		
											Location:  Texas 
							
						
		 
		
						
						 
													
							
						
									
						Post 
					 
								by Billy Catringer   »  Thu Feb 05, 2009 7:44 pm 
			
			
			
			
			Additional note. Silver is itself a good absorber of neutrons and there are some alloys of it that hold up well in nuclear service.
			
			
									
									
						 
		 
				
		
		 
	 
	 
				
		
		
			
				
																			
								MSimon 							 
									
		Posts:  14335  		Joined:  Mon Jul 16, 2007 7:37 pm 		
		
																Location:  Rockford, Illinois 
							
							
				Contact: 
				
			 
				
		 
		
						
						 
													
							
						
									
						Post 
					 
								by MSimon   »  Thu Feb 05, 2009 8:50 pm 
			
			
			
			
			KitemanSA wrote: MSimon wrote: ...Its neutron resistance could be increased if it was made with pure B11.
?? Shouldn't that be B10 which can absorb a neutron and remain Boron?  Admittedly, I am outside my field here.
Neutron absorption causes lattice defects. The less the better. Thus B11.
 
			
			
									
									Engineering is the art of making what you want from what you can get at a profit.